Labarai - Buɗe tushen: ƙirar injin ƙirar sarrafa GRBL

——Daga Dandalin Masu Haɓaka DWIN

Maganin yana ɗaukar guntu T5L a matsayin babban iko, yana sarrafa GRBL ta hanyar tashar jiragen ruwa na 2, kuma yana motsa motar don sarrafa babban injin injin ɗin don samar da hanyar tushe ta hanyar zane na X, Y, da Z axes, don gane. da atomatik engraving aiki.Yana da ayyuka na kyakkyawar dubawa, daidaitaccen iko, sarrafawa da yawa da kuma saitin kayan aiki na atomatik.

Bayani:

1. Sarrafa GRBL ta hanyar tashar tashar DWIN 2;

2. Tashar tashar jiragen ruwa ta GRBL ta gane sakon, rarrabawa da nunin tsangwama;

3. Allon yana sarrafa ayyuka daban-daban kamar motsi na GRBL ta hanyar aika umarni;

4. Goyan bayan kulawar hannu, mai jituwa tare da ma'anar ƙirar ƙirar hannu ta Weihong;

5. Ana iya adana sigogin allo bayan kashe wuta;

6. Ta hanyar sarrafa WS2812 don nuna fitilun matsayi kamar rashin aiki, tsayawa, da aiki;

Zane Magani:

(1) DGUS injiniyan ƙirar ƙirar ƙira

(2) Zane na baya

Sanarwa:

1. ESP32 na GRBL na iya amfani da sigar asali ba tare da gyara ba;

2. Bude abin da aka makala zazzagewa na fayil ɗin PCB na allo tare da Easytron, kuma za'a iya tabbatar da ƙirar ƙirarsa da PCB kai tsaye;

3. Fayil ɗin kernel yakamata ya zama na ƙarshe.Wannan aikin yana amfani da sigar kwaya a cikin abin da aka makala, kuma kernel ɗin yana buƙatar sabunta shi daban.

Bude tushen: injin ƙirar ƙirar ƙirar sarrafa GRBL_ESP32 bisa allon COF